HG Natural Stone Protector Product 33 Shine Seal & Protection – 1 Litre

Description

HG Natural Stone Protector Product 33 Shine Seal & Protection – 1 Litre

• HG Protective Coating Gloss Finish: An easy to apply polymer emulsion sealer which protects against wear & damage to the top layer of stone
• Floor protector for natural stone tiles: This emulsion forms a wafer-thin glossy yet extremely protective coating, to help seal the stone & restore its natural shine
• Won’t damage your flooring: Safe to use on marble, slate, quartz, sandstone & all other types of calciferous natural stones in the hall, dining area, kitchen or bathroom
• Fast drying anti slip formula: This protective sealer film for natural stone tiling also has an anti-slip effect. 1 litre is enough for approx. 60 m2 to 80 m2 per layer
• 1 Litre bottle of HG Protective Coating Gloss Finish: Dilute 1:1 with cold water & spread over floor. After 40 minutes a 2nd coat can be applied

HG Natural Stone Protector Product 33 

HG natural stone protector is an easy to apply polymer emulsion. This emulsion forms a wafer-thin glossy yet extremely protective coating. Perfect for protecting marble or other natural stone and giving it a glossy shine.

Marble sealer against wear and tear and other damages

Protect your natural stone floor and make it shine? This natural stone tile sealer protects the top layer of the natural stone against wear and damage by acids such as soft drinks and wine. This protective sealer film for natural stone also has an anti-slip effect. 1 litre is sufficient for approximately 60 m2 to 80 m2 per layer.

How do you use HG natural stone protector?

Follow the steps below to protect your natural stone floor against wear and tear and other damages with HG natural stone protector (HG product 33):

1) The surface must be completely clean and free of grease and dust.

2) Preferably apply with a waxer for even application. It is also possible to use a lint-free, clean tea towel wrapped around a squeegee. On coarse floors, use a paint roller (fur roller), taking care to avoid excessive foaming during application.

3) Dilute HG natural stone protector 1 on 1 with cold water.

4) Pour the natural stone tile sealer solution over the floor and spread it in one direction over the natural stone floor with a waxer or roller.

5) After about 40 minutes, a second coat can be applied crosswise onto the first layer.